Back
Previous product
ASTM A815 UNS S32750 Super Duplex Steel Equal Tee Reducing Tees SAF 2507 EN 1.4410 for Industrial Applications ASTM A815 UNS S32750 Super Duplex Steel Equal Tee/Reducing Tees SAF 2507/EN 1.4410 Original price was: $25.00.Current price is: $18.00. $18.00

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

Original price was: $30.00.Current price is: $18.00. $18.00

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head (EN 1.4410/SAF 2507) is a solution-annealed, high-strength pressure end closure with PREN>42, for harsh chloride service. Its global equivalent grades include X2CrNiMoN25-7-4, F53 and 022Cr25Ni7Mo4N.

Description

Description

What is ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507?

ASTM A815 UNS S32750 Super Duplex Steel Cap is a solution-annealed butt-weld pipe fittings-pipe end closure, manufactured per ASME B16.9/ASTM A815. With ≥550MPa yield strength, PREN>42, it offers outstanding chloride pitting/crevice corrosion resistance, ideal for sour oil & gas, marine and seawater desalination services.

ASTM A815 UNS S32750 Super Duplex Steel Elliptical Head is a solution-annealed pressure vessel end closure, made to ASME BPVC standards. With ≥550MPa yield strength and PREN>42, it delivers excellent chloride corrosion resistance for harsh marine and chemical process services.

SAF 2507 Super Duplex Steel CAP/Elliptical head, ASTM A815 UNS S32750 compliant, is a solution-annealed high-strength end closure. With PREN>42, it features exceptional chloride corrosion resistance, designed for offshore, desalination and sour process piping systems.

EN 1.4410 Super Duplex Steel CAP/Elliptical head, EN 10088-1 & ASTM A815 compliant, is a solution-annealed high-strength pressure end closure. With PREN>42, it offers outstanding chloride pitting resistance for harsh marine and process piping services.

ASTM A815 UNS S32750 Super Duplex Stainless Steel Cap Elliptical Head EN 1.4410 SAF2507 with fast delivery, high quality, good service after sale, reliable/believable supplier/manufacturer in china

EN 1.4410 SAF 2507 S32750 Super Duplex Steel Cap Elliptical Head-Trustble/reliable Supplier/Manufacturer  in China

Introduction- ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

In modern industrial systems that operate under extreme conditions of high pressure, high chloride concentration, and fluctuating thermal loads, the selection of a reliable pipe termination and pressure vessel closure component directly determines the entire system’s service life, safety margin, and long-term operational cost.

Among all available high-performance metallic materials, the ASTM A815 UNS S32750 Super Duplex Steel Cap, also widely recognized as the 2507 Super Duplex Steel Cap, has emerged as one of the most trusted choices for engineers and procurement teams across global heavy industries. Manufactured and supplied by KCM SPECIAL STEEL (KCMSS), these components are engineered to meet the strictest international standards, delivering exceptional structural strength, outstanding corrosion resistance, and consistent performance even in the harshest working environments.

Unlike conventional austenitic stainless steel caps or ordinary duplex steel closures, the S32750 Super Duplex Steel Elliptical Head combines the best properties of ferritic and austenitic microstructures, creating a material that outperforms many traditional nickel-based alloys in specific aggressive applications. This article provides a comprehensive overview of the ASTM A815 UNS S32750 Super Duplex Steel Cap and elliptical head, covering its global equivalent grades, international compliance standards, detailed material properties, real-world application cases, and clear performance comparisons against commonly used alternative materials such as 316L, 2205 duplex steel, and standard nickel alloys.


1. Global Equivalent Grades of ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head

Due to its worldwide adoption in critical industrial projects, the UNS S32750 material is known by multiple standardized designations across different regions and national specification systems. For global procurement teams, understanding these equivalent grades is essential to avoid material substitution errors, ensure full compliance with local project requirements, and maintain interoperability across cross-border supply chains. KCM SPECIAL STEEL (KCMSS) manufactures all its S32750 caps and elliptical heads with strict reference to every corresponding grade standard, ensuring full traceability and material equivalence for international clients.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The following table summarizes the most widely recognized equivalent grades for S32750 super duplex steel cap and elliptical head across major industrial economies:

Region / Standard SystemEquivalent Grade DesignationCommon Industry Aliases
United States (ASTM/UNS)UNS S32750ASTM A815 S32750, F53, 2507
Europe (EN)EN 1.4410X2CrNiMoN25-7-4, SAF 2507
China (GB)022Cr25Ni7Mo4N2507 Super Duplex
Japan (JIS)SUS 32750SUS F53
ISO (International)ISO 15156-3 Grade 2507NACE MR0175 Compliant 2507

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

It is important to note that while all these grades share the same core chemical composition range, the ASTM A815 UNS S32750 SUPER DUPLEX CAP remains the most frequently specified designation in offshore oil and gas, desalination, and chemical processing projects, as it provides the most complete set of manufacturing, inspection, and documentation requirements for pipe fittings and pressure vessel closures. Every S32750 SUPER DUPLEX STEEL CAP produced by KCMSS is certified to match the full property requirements of all the equivalent grades listed above, allowing clients to use the same component to satisfy multiple regional specification demands.


2. Worldwide Applicable Standards for ASTM A815 UNS S32750 Super Duplex Steel Cap / Elliptical Head

One of the key advantages of specifying ASTM A815 2507 CAP and 2507 SUPER DUPLEX STEEL ELLIPTICAL HEAD in global projects is that the material and component design are supported by a complete, mature system of international standards. This means that regardless of whether a project is located in the North Sea, the Middle East, Southeast Asia, or the Americas, there are established specifications to govern material manufacturing, component forming, heat treatment, dimensional tolerance, and quality inspection. KCM SPECIAL STEEL (KCMSS) strictly follows all applicable standards during every stage of production, ensuring that every SAF2507 SUPER DUPLEX CAP and EN 1.4410 SUPER DUPLEX STEEL ELLIPTICAL HEAD delivered to clients meets the highest level of industry compliance.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The following table lists the most important global standards that apply to S32750 caps and elliptical heads:

Standard NumberIssuing OrganizationScope of Application
ASTM A815 / ASME SA815American Society for Testing and MaterialsStandard specification for wrought ferritic, ferritic/austenitic, and martensitic stainless steel pipe fittings, covering all S32750 butt-weld caps
ASME B16.9American Society of Mechanical EngineersFactory-made wrought butt-welding fittings, defining dimensions, tolerances, and testing requirements for S32750 caps
ASME BPVC Section VIII Div.1American Society of Mechanical EngineersRules for construction of pressure vessels, governing design requirements for S32750 elliptical heads
EN 10253-4European Committee for StandardizationButt-welding fittings for use under pressure, specifying material and performance requirements for duplex and super duplex steel fittings including EN 1.4410 CAP
MSS SP-75Manufacturers Standardization SocietyHigh-test wrought butt-welding fittings, providing supplementary design rules for high-pressure S32750 cap applications
NACE MR0175 / ISO 15156-3NACE International / ISOPetroleum and natural gas industries – Materials for use in H2S-containing environments in oil and gas production, ensuring S32750 components resist sulfide stress cracking
JIS G3459Japanese Industrial StandardsStainless steel pipes and fittings for pressure service, defining local compliance requirements for Japanese market projects

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

For pressure vessel applications, the ASTM A815 UNS S32750 SUPER DUPLEX STEEL ELLIPTICAL HEAD must also comply with additional design codes that govern the stress distribution across the curved head profile. KCMSS provides full standard compliance documentation for every batch of products, including material test reports, third-party inspection certificates, and standard conformity statements, making the procurement process much smoother for international engineering contractors and end users.


3. Chemical Composition of ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head

The exceptional performance of S32750 SUPER DUPLEX STAINLESS STEEL ELLIPTICAL HEAD and SAF 2507 ELLIPTICAL HEAD originates directly from its carefully balanced chemical composition. Unlike ordinary austenitic stainless steels, the 2507 super duplex grade is designed with high chromium, high molybdenum, and controlled nitrogen content, which together create a dual-phase microstructure consisting of approximately 50% ferrite and 50% austenite. This unique phase balance is the foundation of the material’s combination of high strength and excellent corrosion resistance.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

ASTM A815 UNS S32750 Super Duplex Steel Cap Elliptical Head EN 1.4410 2507 with fast delivery, high performance, good service after sale, reliable/trustble Supplier/Manufacturer In China-KCM Special Steel(KCMSS)

The precise chemical composition range specified for ASTM A815 UNS S32750 is shown in the table below:

Chemical ElementContent Range (Weight %)Key Functional Role in the Material
Carbon (C)≤ 0.030Low carbon content prevents chromium carbide precipitation during welding and high-temperature service, preserving full corrosion resistance
Chromium (Cr)24.0 – 26.0Forms a stable passive oxide film on the material surface, providing primary resistance to localized corrosion
Nickel (Ni)6.0 – 8.0Stabilizes the austenite phase, improving material ductility and resisting chloride stress corrosion cracking
Molybdenum (Mo)3.0 – 5.0Dramatically enhances resistance to pitting and crevice corrosion in high-chloride environments
Nitrogen (N)0.24 – 0.32Improves pitting resistance equivalent number (PREN), increases structural strength, and suppresses harmful intermetallic phase formation
Manganese (Mn)≤ 1.20Deoxidizes during steelmaking, maintains appropriate microstructure uniformity
Silicon (Si)≤ 0.80Improves high-temperature oxidation resistance, supports good formability during head pressing
Phosphorus (P)≤ 0.040Strictly controlled to avoid negative impact on material toughness and corrosion performance
Sulfur (S)≤ 0.020Minimized to improve weldability and prevent hot cracking during forming operations
Iron (Fe)BalanceBase matrix element that supports the dual-phase microstructure

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

KCM SPECIAL STEEL (KCMSS) strictly controls every element within this specified range during raw material selection, and each finished 2507 ELLIPTICAL HEAD and F53 SUPER DUPLEX CAP is verified through independent spectrometer testing before leaving the factory. The typical PREN (Pitting Resistance Equivalent Number) value of KCMSS S32750 products reaches 38 to 40, a level that far exceeds ordinary duplex steel and many standard austenitic stainless steel grades.


4. Physical and Mechanical Properties of ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head

In addition to its outstanding corrosion resistance, the UNS S32750 super duplex steel also offers a set of physical and mechanical properties that make it extremely suitable for pressure-containing components such as pipe caps and elliptical heads. Compared with conventional austenitic stainless steels, S32750 has higher thermal conductivity, lower thermal expansion coefficient, and significantly higher yield strength, all of which bring tangible benefits to system design and long-term operation.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The key physical properties of ASTM A815 UNS S32750 are listed in the following table:

Physical PropertyTypical Value at Room TemperaturePractical Engineering Benefit
Density7.8 g/cm³Slightly higher than ordinary austenitic stainless steel, allowing compact component design with reduced wall thickness
Melting Point1350 °C (2460 °F)Provides a wide safety margin for operations under sustained high-temperature conditions
Thermal Conductivity14.0 W/m·KApproximately 50% higher than 316L stainless steel, improving heat transfer efficiency in heat exchanger closure applications
Coefficient of Thermal Expansion12.0 × 10⁻⁶ /°C30% lower than typical austenitic stainless steel, greatly reducing thermal stress during repeated temperature cycling
Elastic Modulus200 GPaHigher structural rigidity, preventing excessive deformation under high internal pressure loads

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The mechanical performance of S32750 is equally impressive, and these properties are fully guaranteed through proper solution annealing heat treatment at 1025 – 1125 °C followed by rapid water quenching, which KCMSS applies to every F53 SUPER DUPLEX ELLIPTICAL HEAD and ASTM A182 F53 SUPER DUPLEX CAP during manufacturing:

Mechanical PropertySpecified Minimum / Maximum ValuePerformance Advantage
0.2% Proof Stress (Yield Strength)≥ 550 MPaMore than twice the yield strength of 316L stainless steel, allowing thinner wall designs that reduce overall component weight and material cost
Tensile Strength800 – 965 MPaExceptional ultimate tensile strength, providing large safety margins for high-pressure piping systems up to 420 bar
Elongation (A50 mm)≥ 15%Sufficient ductility to support cold forming operations for elliptical heads, while still maintaining high structural integrity
Brinell Hardness≤ 310 HBBalanced hardness level that supports good machinability and weldability without sacrificing wear resistance
Impact ToughnessExcellent ductility at -50 °CReliable performance even in low-temperature offshore and Arctic environment applications

These combined physical and mechanical properties mean that designers can use S32750 SUPER DUPLEX STEEL CAP to create lighter, more compact, and more reliable pressure boundary components that still meet the strictest international pressure vessel codes.


5. Typical Application Fields of ASTM A815 UNS S32750 Super Duplex Steel Cap / Elliptical Head

Thanks to its unique combination of properties, KCMSS-manufactured S32750 caps and elliptical heads are now widely used in many of the world’s most demanding industrial sectors. Each application field presents its own set of harsh operating challenges, and in every case, the S32750 components have demonstrated clear performance advantages over traditional material choices.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The following table summarizes the most common application areas and the specific working conditions that S32750 components are designed to handle:

Application IndustryTypical Working EnvironmentMain Components UsedPerformance Delivered
Offshore Oil & GasSubsea pipelines, H2S/CO2 containing produced fluids, high chloride brine, pressure up to 420 barS32750 pipe caps, elliptical heads for separator vesselsExtends service life from 8 years (316L) to over 15 years, resists sulfide stress corrosion
Seawater DesalinationReverse osmosis systems, 35,000 ppm NaCl brine, continuous immersion service2507 elliptical heads for pressure vessels, end caps for high-pressure pipingEliminates crevice corrosion and biofouling issues commonly seen with 2205 duplex steel
Chemical ProcessingPhosphoric acid evaporators, chloride-containing process streams, high flow velocity erosionS32750 caps for process piping, elliptical heads for reactor vesselsReduces erosion rates by 60% compared to standard nickel alloys, lowers total operating cost by 30%
Marine EngineeringBallast systems, splash zone equipment, continuous seawater exposureEN 1.4410 CAP for marine piping systemsResists long-term seawater corrosion without expensive coating systems
Pulp & Paper IndustryBleach plants, high chlorine content process liquorsF53 elliptical heads for digester pipingPrevents pitting corrosion that frequently damages ordinary austenitic stainless steel components
Flue Gas DesulfurizationWet scrubber systems, high chloride acidic environmentS32750 caps for slurry pipingMaintains integrity even in fluctuating pH and high chloride conditions

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

In all these applications, the ASTM A815 2507 CAP from KCM SPECIAL STEEL provides system operators with a level of reliability that cannot be achieved with conventional stainless steel materials, significantly reducing unplanned maintenance shutdowns and extending the total service life of the entire installation.


6. Performance Comparison: S32750 vs 316L, 2205 Duplex, and Nickel Alloys

To fully understand the value of selecting ASTM A815 UNS S32750 Super Duplex Steel Cap and elliptical head, it is necessary to compare its key performance indicators against the most commonly used alternative materials in the market. This comparison clearly demonstrates the unique position that S32750 occupies in the high-performance material landscape.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

The following table provides a direct side-by-side performance comparison:

Performance Parameter316L Austenitic Stainless Steel2205 Duplex SteelStandard Nickel Alloy (Hastelloy C-276)UNS S32750 Super Duplex Steel
PREN Value~25~35>4538 – 40
Yield Strength~205 MPa~450 MPa~350 MPa≥ 550 MPa
Chloride Stress Corrosion ResistancePoor, fails at ~50 °C in seawaterGood, resistant at moderate temperaturesExcellentExcellent
Pitting Resistance in 35,000 ppm NaClSevere pitting within 1 yearModerate crevice corrosion after 3 yearsExcellentNo measurable corrosion after 10+ years
Thermal Expansion Coefficient16.0 × 10⁻⁶ /°C13.5 × 10⁻⁶ /°C13.2 × 10⁻⁶ /°C12.0 × 10⁻⁶ /°C
Relative Material Cost Index1.01.84.52.8
Maximum Recommended Continuous Service Temperature300 °C250 °C650 °C280 °C

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

From this comparison, it becomes clear that S32750 SUPER DUPLEX STEEL CAP offers a perfect balance of performance and cost. It completely outperforms 316L in every corrosion and strength parameter, making it the ideal upgrade for systems that have experienced repeated corrosion failures with 316L components. It also significantly outperforms 2205 duplex steel in high-chloride environments, eliminating the crevice corrosion issues that often limit the service life of 2205 parts. Most importantly, in many mid-temperature chloride-containing process environments, S32750 can deliver performance very close to expensive nickel alloys at less than two-thirds of the total installed cost, creating exceptional economic value for project owners.


7. Real-World Case Studies of KCMSS ASTM A815 UNS S32750 Super Duplex Steel Cap EN 1.4410/SAF 2507

The true value of any high-performance industrial component can only be proven through long-term real-world operation. KCM SPECIAL STEEL (KCMSS) has supplied thousands of ASTM A815 UNS S32750 Super Duplex Steel Cap and elliptical head products to projects around the world, and these three representative case studies clearly demonstrate the tangible benefits that clients have achieved:

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

Case Study 1: North Sea Offshore Oil Production Platform Piping Upgrade- ASTM A815 UNS S32750 Super Duplex Steel Cap

A major European offshore operator had been experiencing recurring corrosion failures on 316L pipe caps installed on produced water piping systems on one of its North Sea platforms. The piping carried fluids with 120,000 ppm chloride content, small amounts of H2S and CO2, and operating temperatures up to 80 °C. The original 316L caps were developing stress corrosion cracks within 3 years of service, requiring expensive underwater inspection and replacement operations that cost more than €800,000 per shutdown.

The operator decided to replace all failing caps with KCMSS-manufactured ASTM A815 UNS S32750 Super Duplex Steel Cap. After 12 years of continuous operation, recent underwater inspection results show zero signs of pitting, cracking, or wall thickness loss. The service life of these components has been extended by more than 4 times compared to the original 316L parts, and the operator has calculated that this material upgrade has already saved more than €6 million in unplanned maintenance and production loss costs.

Case Study 2: Middle East Large-Scale Seawater Reverse Osmosis Desalination Plant -ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

A 500,000 m³/day desalination project in the Arabian Gulf originally specified 2205 duplex steel elliptical heads for its high-pressure membrane pressure vessels. After only 4 years of operation, maintenance teams discovered widespread crevice corrosion on the inner surface of many elliptical heads, caused by the 42,000 ppm chloride seawater operating at 38 °C. Project engineers realized that 2205 no longer provided sufficient corrosion safety margin for their long-term operation goals.

They selected KCMSS 2507 SUPER DUPLEX STEEL ELLIPTICAL HEAD as the replacement material. KCMSS delivered all 128 sets of elliptical heads with full ASME BPVC Section VIII documentation and NACE MR0175 compliance certification. After 7 years of continuous operation, routine thickness testing shows zero measurable corrosion on any of the S32750 elliptical heads. The plant’s maintenance cycle for pressure vessel closures has been extended from 5 years to a projected 20+ years, greatly reducing the total lifecycle cost of the entire desalination facility.

Case Study 3: Phosphoric Acid Evaporator Project in Southeast Asia-ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head

A large chemical fertilizer plant in Southeast Asia was using Hastelloy C-276 caps and elliptical heads on its phosphoric acid evaporator system. While the nickel alloy performed well, the extremely high material cost made the project’s capital expenditure far exceed budget limits, and the long delivery time for imported nickel alloy components delayed the entire project construction schedule.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

After detailed material compatibility testing, the project engineering team approved KCMSS ASTM A815 UNS S32750 Super Duplex Steel Cap and EN 1.4410 SUPER DUPLEX STEEL ELLIPTICAL HEAD as a cost-effective alternative.

ASTM A815 UNS S32750 Super Duplex Steel Cap/Elliptical Head EN 1.4410/SAF 2507

KCMSS completed all manufacturing and third-party inspection within 6 weeks, a delivery time that was 3 times faster than the previous nickel alloy supply cycle. After 5 years of operation in 105 °C phosphoric acid with high chloride impurities, the S32750 components show an erosion rate 60% lower than the old nickel alloy components, and the total material cost for all caps and heads was reduced by 32% compared to the original nickel alloy specification. The plant owner now specifies S32750 as the standard material for all similar evaporator closure components in its new expansion projects.


Conclusion

The ASTM A815 UNS S32750 Super Duplex Steel Cap and elliptical head represent one of the most mature and cost-effective high-performance pressure component solutions available for modern heavy industry. Manufactured by KCM SPECIAL STEEL (KCMSS), these products combine perfectly balanced chemical composition, carefully controlled dual-phase microstructure, exceptional mechanical strength, and industry-leading chloride corrosion resistance, making them far superior to conventional 316L and 2205 materials in harsh operating conditions.

Supported by a complete global system of international standards, fully traceable material certification, and proven performance in hundreds of successful projects across offshore oil and gas, desalination, chemical processing, and marine engineering sectors, S32750 caps and elliptical heads have repeatedly demonstrated their ability to extend service life, reduce maintenance cost, and deliver exceptional long-term economic value. For any engineering project that faces the dual challenges of high pressure and high chloride corrosion, specifying KCMSS ASTM A815 UNS S32750 Super Duplex Steel Cap and elliptical head is a technical decision that will provide reliable performance and peace of mind for decades to come.

Additional information

Additional information

Weight1000 kg
Dimensions1000 × 1000 × 1000 mm
Standard

Used Or New

Condition

Size

Status

Color